In general, industrial pipes are built with resilient materials and in reliable designs. Therefore, you can expect prolonged service after purchase and installation of high-quality piping in your commercial or industrial building. The channels will not experience accelerated deterioration due to high mechanical pressure or wear. However, these tubes are not infallible. They will experience natural degradation over time due to normal usage. In addition, adverse external factors can contribute to pipe damage. When this happens, it is important to perform repairs correctly. Here are the most beneficial methods to consider for industrial pressure pipe rehabilitation.
You should think about choosing chemical grouting as your repair method if your industrial pipes require non-structural repair. This technique is ideal for stopping leakage from your tubing and restoring normal functionality. Typically, grouting involves injecting speciality grout into cracks through which fluid is leaking. The grout is normally self-setting, and it can penetrate wall cracks and joints. You should note that this rehabilitation method will only work if your pipes are structurally sound. When choosing your chemical grout, you should consider factors such as setting times, product flexibility and durability.
You should consider using cured-in-place pipe liners if you are interested in repairing and strengthening your industrial piping. This is a trenchless repair method which is invaluable for pipes with significant damaged sections. Typically, this method uses a polyester flexible sock impregnated with special resin. This sleeve is installed through inversion or winching into the pipe. This technique is favourable because the flexible sock conforms to the shape and contours of the tubing, promoting ideal repairs. Also, you should note that you can choose sleeves with different thicknesses to increase the strength of your piping.
Sliplining is a beneficial technique for rehabilitating your industrial pipes if they have structural damage. This method involves inserting strong pipes, through pulling or pushing, into the existing channels. This method is favourable because it is cost-effective. In simple terms, the financial resources required for restoring pipes through this method are significantly lower than replacement. Also, this process can repair pipes which would otherwise need to be reconstructed. However, you should note that that the economic benefits can decline where the industrial pipes are installed deep in the ground. The lack of direct access will necessitate extensive excavation, so the total costs of the project will rise exponentially.
Finally, if your industrial pipes are severely damaged, you should consider replacing the entire network with durable pressure pipes for optimal long-term performance.